How to Hang a Blue Metallic Squares Curtain for Parties
By Party Glowz | Published: 2026-11-03
Category: How-to Guides
Mount, weight, and light a blue metallic squares curtain so it hangs straight as a doorway or photo backdrop. Includes tape, tension, and lighting checkpoints.
Quick answer
Hang the curtain from a clean, dry, flat surface at the top, press the double-stick tape firmly along the full 36-inch width, and let the 78-inch length fall free without stretching. Test one corner first, then work across.
Why the mounting surface matters more than the tape
Metallic square curtains are light, so the weak point is usually the surface, not the adhesive. Painted drywall, textured plaster, and dusty trim release tape quickly; glass, sealed wood, and smooth metal hold better. If you are covering a doorway, mount to the frame or header rather than the door itself so the curtain stays put when the door moves.
For a photo backdrop, a flat wall behind the subject gives the cleanest result. A curtain hung across a corner or over a window will pick up shadows and wrinkles that show in photos.
When a doorway curtain is the wrong choice
A 78-inch drop is long enough to pool on the floor in many rooms and to brush against guests in a busy doorway. If the opening is narrower than 36 inches, the curtain will bunch; if it is wider, you will see gaps. Measure the opening before buying, and treat this curtain as a decorative layer rather than a privacy screen.
Steps to hang the curtain
- Measure and mark the top line: Measure the width you need to cover and mark a level line at the height where the top edge will sit. Common mistake: marking by eye, which leaves the curtain visibly slanted in photos. Check the line with a level before applying any tape.
- Clean and dry the surface: Wipe the mounting strip with a damp cloth and let it dry completely. Dust, grease, and fresh paint are the main reasons tape fails overnight. If the surface is textured or flaking, choose a different spot or add a temporary rod.
- Test one corner first: Press a short piece of the included double-stick tape at one top corner and hold for several seconds. If it lifts under light pull, stop and change surfaces rather than adding more tape. A failed corner test means the surface, not the tape, is the problem.
- Apply tape across the full width: Run tape along the entire 36-inch top edge, pressing firmly as you go. Common mistake: taping only the ends, which lets the middle sag and pull the squares out of line. Support the full width, not just the corners.
- Press the curtain top edge into place: Start at one end and work across, smoothing the top edge with your hand. Avoid stretching the curtain sideways; the metallic squares should hang square, not skewed. Let the length fall free and check that the bottom edge hangs evenly.
- Light it from the front: Aim light at the curtain from the guest side rather than from behind. Backlighting turns the metallic squares into silhouettes and washes out the blue in photos. Take one test photo before guests arrive and adjust the light angle if the squares look dull.
Product facts
- Blue Metallic Squares Curtain: Measures 78 inches long by 36 inches wide and includes double-stick tape. The included tape means you can hang it without buying extra adhesive, but the 36-inch width sets a hard limit on how wide a doorway or backdrop panel it can cover.
Blue Metallic Squares Curtain
